CATEGORIES

Hempel Epoxy Filler 130ml

40,00 €

SKU: 5709516017018-1 Categories: Antifouling& Primers,Thinners, Epoxy filler

Description

Hempel Epoxy Filler Information

Hempel Epoxy Filler is a two-component, solvent-free, epoxy filler for application up to 5mm on metals, hardwood, and other rigid materials above or below the waterline. Once cured it provides a water-resistant finish.

Hempel Epoxy Filler can also be used for filling of pinholes in welding and similar irregularities in steelwork not later exposed to strong chemicals.

Hempel Epoxy Filler Specification

Epoxy Quantity	65ml
Hardener Qunatity	65ml
Dry Colour	Light Grey
Mixing Ratio	1:1
Service Temperature	Dry exposure only: 140 degrees Celcius (284°F) In water exposure: 35 degrees Celcius (95°F)
Theoretical Spreading Rate	Dry film recommended thickness (1000 micron): 1m²/L Dry film low thickness (500 micron): 2m²/L Dry film high thickness (5000 micron): 0.2m²/L Wet film recommended thickness (1000 micron): 1m²/L Wet film low thickness (500 micron): 2m²/L Wet film high thickness (1000 micron): 1m²/L
Application Temperature	Minimum air temperature 3°C (5°F) above the dew point. Minimum surface temperature 5°C (41°F) during application and curing.
Drying Time at 20°C (68°F)	Surface dry: 8 hours Fully cured: 5 days
Overcoating Time at 20°C (68°F)	Minimum 8 hours / Maximum 24 hours
Pot Life at 20°C (60°F)	60 minutes
Storage Life at 25°C (77°F)	Base (Epoxy): 24 months Curing Agent (Hardener): 36 months